Audio compatibility relationships
A public, directed map of protocols, physical interfaces and the conditions that separate a connector match from a safe working system.
Supported
The required direction and interface are recorded at both endpoints. Operating mode and region still need a final check.
Conditional
The path is plausible, but gain, firmware, ecosystem, load, adapter or setup conditions decide the outcome.
Unknown
Evidence is insufficient. Unknown never becomes supported just to fill a recommendation list.
What is recorded on the 30 public profiles
A dash means “not in this record”, not “definitely unsupported”. Open the product profile and official source before making it a hard requirement.
| Product | AirPlay 2 | Google Cast | Roon Ready | NAS / SMB | HDMI ARC/eARC | Balanced out | Sub out |
|---|---|---|---|---|---|---|---|
| WiiM Ultra | — not recorded | ✓ recorded | ✓ recorded | — not recorded | ✓ recorded | — not recorded | ✓ recorded |
| WiiM Amp Ultra | — not recorded | ✓ recorded | ✓ recorded | — not recorded | ✓ recorded | — not recorded | ✓ recorded |
| WiiM Pro Plus | ✓ recorded | ✓ recorded | ✓ recorded | — not recorded | — not recorded | — not recorded | — not recorded |
| Arylic LP10 | ✓ recorded | ✓ recorded | — not recorded | — not recorded | — not recorded | — not recorded | — not recorded |
| FiiO S15 | — not recorded | — not recorded | — not recorded | ✓ recorded | ✓ recorded | ✓ recorded | — not recorded |
| FiiO K17 | — not recorded | — not recorded | — not recorded | — not recorded | — not recorded | ✓ recorded | — not recorded |
| TOPPING DX5 II | — not recorded | — not recorded | — not recorded | — not recorded | — not recorded | ✓ recorded | — not recorded |
| FiiO FT1 | — not recorded | — not recorded | — not recorded | — not recorded | — not recorded | — not recorded | — not recorded |
| Bluesound NODE | ✓ recorded | — not recorded | ✓ recorded | ✓ recorded | ✓ recorded | — not recorded | ✓ recorded |
| Cambridge Audio EXN100 | ✓ recorded | ✓ recorded | ✓ recorded | — not recorded | ✓ recorded | ✓ recorded | — not recorded |
| Cambridge Audio MXN10 | ✓ recorded | ✓ recorded | ✓ recorded | — not recorded | — not recorded | — not recorded | — not recorded |
| Sonos Port | ✓ recorded | — not recorded | — not recorded | — not recorded | — not recorded | — not recorded | — not recorded |
| Bluesound POWERNODE | ✓ recorded | — not recorded | ✓ recorded | — not recorded | ✓ recorded | — not recorded | ✓ recorded |
| Cambridge Audio Evo 150 SE | ✓ recorded | ✓ recorded | ✓ recorded | — not recorded | ✓ recorded | — not recorded | ✓ recorded |
| Denon Home Amp | ✓ recorded | — not recorded | — not recorded | — not recorded | ✓ recorded | — not recorded | ✓ recorded |
| Marantz MODEL M1 | ✓ recorded | — not recorded | — not recorded | — not recorded | ✓ recorded | — not recorded | ✓ recorded |
| iFi audio GO bar Kensei | — not recorded | — not recorded | — not recorded | — not recorded | — not recorded | — not recorded | — not recorded |
| Audeze Maxwell 2 | — not recorded | — not recorded | — not recorded | — not recorded | — not recorded | — not recorded | — not recorded |
| Sennheiser IE 200 | — not recorded | — not recorded | — not recorded | — not recorded | — not recorded | — not recorded | — not recorded |
| SVS SB-1000 Pro | — not recorded | — not recorded | — not recorded | — not recorded | — not recorded | — not recorded | — not recorded |
| Bluesound NODE ICON | ✓ recorded | — not recorded | ✓ recorded | ✓ recorded | ✓ recorded | ✓ recorded | ✓ recorded |
| WiiM Amp | ✓ recorded | ✓ recorded | ✓ recorded | — not recorded | ✓ recorded | — not recorded | ✓ recorded |
| Arylic LP20 | ✓ recorded | ✓ recorded | — not recorded | ✓ recorded | — not recorded | — not recorded | ✓ recorded |
| Arylic H50 | ✓ recorded | — not recorded | — not recorded | ✓ recorded | ✓ recorded | — not recorded | ✓ recorded |
| FiiO K13 R2R | — not recorded | — not recorded | — not recorded | — not recorded | — not recorded | — not recorded | — not recorded |
| KEF Kube 12 MIE | — not recorded | — not recorded | — not recorded | — not recorded | — not recorded | — not recorded | — not recorded |
| KEF KC62 | — not recorded | — not recorded | — not recorded | — not recorded | — not recorded | — not recorded | — not recorded |
| WiiM Sub Pro | — not recorded | — not recorded | — not recorded | — not recorded | — not recorded | — not recorded | — not recorded |
| Sonos Sub Mini | — not recorded | — not recorded | — not recorded | — not recorded | — not recorded | — not recorded | — not recorded |
| Sonos Sub 4 | — not recorded | — not recorded | — not recorded | — not recorded | — not recorded | — not recorded | — not recorded |
19 representative stored edges
| Status | From | To | Recorded path | Boundary |
|---|---|---|---|---|
| Supported | WiiM Ultra | FiiO K17 | USB audio out → USB audio in | Both endpoint directions are recorded. |
| Supported | WiiM Ultra | TOPPING DX5 II | USB audio out → USB audio in | Both endpoint directions are recorded. |
| Supported | WiiM Pro Plus | FiiO K17 | Coaxial or optical S/PDIF | A matching digital output/input pair is recorded. |
| Supported | Arylic LP10 | FiiO K17 | Optical S/PDIF | A matching optical output/input pair is recorded. |
| Supported | Bluesound NODE | FiiO K17 | Coaxial, optical or RCA line | Multiple matching endpoint pairs are recorded. |
| Supported | FiiO K17 | FiiO FT1 | 4.4 mm balanced headphone | The output and supplied/recorded headphone input path match. |
| Conditional | Cambridge Audio EXN100 | FiiO K17 | XLR output → 4.4 mm balanced line input | A correctly wired XLR-to-4.4 mm balanced cable or adapter is required; verify pinout and level, then use one master volume. |
| Conditional | WiiM Amp Ultra | Passive speakers | Speaker binding posts | Verify impedance, sensitivity, room and required peak level. |
| Conditional | WiiM Ultra | Powered subwoofer | Subwoofer line output | Verify input type, crossover, level tracking and restart behaviour. |
| Conditional | Bluesound POWERNODE | KEF Q3 Meta | Speaker binding posts | Verify minimum impedance, listening distance, target SPL and headroom. |
| Conditional | Bluesound POWERNODE | SVS SB-1000 Pro | Wired subwoofer output → RCA input | Verify crossover, gain and placement. |
| Conditional | Cambridge Audio Evo 150 SE | Spendor A2.2 | Speaker binding posts | Verify minimum impedance, listening distance, target SPL and headroom. |
| Conditional | Cambridge Audio Evo 150 SE | KEF KC62 | Wired subwoofer output → RCA input | Verify crossover, gain and placement. |
| Conditional | Denon Home Amp | KEF Q3 Meta | Speaker binding posts | Verify minimum impedance, listening distance, target SPL and headroom. |
| Conditional | Denon Home Amp | SVS SB-1000 Pro | Wired subwoofer output → RCA input | Verify crossover, gain and placement. |
| Conditional | Marantz MODEL M1 | Spendor A2.2 | Speaker binding posts | Verify minimum impedance, listening distance, target SPL and headroom. |
| Conditional | Marantz MODEL M1 | KEF KC62 | Wired subwoofer output → RCA input | Verify crossover, gain and placement. |
| Conditional | WiiM Amp Ultra | SVS SB-1000 Pro | Wired subwoofer output → RCA input | Verify crossover, gain and placement. |
Correction · 13 September 2026: The FiiO S15 → TOPPING DX5 II “Balanced XLR line” relation was removed. The S15 XLR is an output and the DX5 II XLR is also an output; this specific analog path cannot be used as an input-to-output connection. This correction does not assess other digital paths. Sources: FiiO S15 and TOPPING DX5 II.
Turn a relation into a recommendation
A compatibility edge answers “can these endpoints form this path?” A scenario adds room, use case, required features and risk boundaries. The Recommendation Finder ranks only after those gates are applied.
Browse scenario guidesOpen Recommendation FinderCorrect a relation
BP50 to Mini300 — separate audio and trigger relations
Checked October 1, 2026. Audio: Arylic BP50 RCA line output to TOPPING Mini300 RCA input (SE) is an interface-based proposed path, not a SoundPath Lab Tested chain. Power control: direct BP50 Trigger Out to Mini300 Trigger IN is unsupported because Arylic lists no BP50 trigger output. Mini300’s manual requires an upstream 12V Trigger Out and TRIG switch mode. Read the BP50 and Mini300 wiring and power-control guide for manual operation, commissioning and remaining evidence gaps. This entry establishes neither a speaker match nor a product fault.
GO CONTROL and existing A31 endpoints
User-provided discovery and synchronised-playback observations, with module and test boundaries, are available in the LP10 compatibility record.
Did this help you make a decision?
Interactive feedback loads without publishing personal information.