Loxjie D60
L2 · Documented recordA digital/line/headphone hub subject to exact output-mode and gain verificationLoxjie D60: A digital/line/headphone hub subject to exact output-mode and gain verification
- System role
- DAC / headphone amplifier / preamplifierConfirm the complete connection path
- Documented official version
- No recorded versionNo dated release recorded
- Independent test scope
- No dated SPL test recordedPublished scope and limitations remain separate
- Source checked
- 2026-09-24A source-check date is not a new device test
Updates & issues, along a timeline.
Latest record first. Expand to read the complete documented history.
Firmware & software
No matching public record has been added. This is not proof that no issue or update exists.
Product issues
No matching public record has been added. This is not proof that no issue or update exists.
Complete history: 0 records. Product, brand and update views use the same canonical event identifiers. Event date and source-check date remain distinct.
Where it fits
A digital/line/headphone hub subject to exact output-mode and gain verification
Limits: Guaranteed maximum headphone power or TV HDMI compatibility from an I2S connector
Keep the conditions visible
Verify mains label and output-mode/volume instructions on the supplied manual before use; match I2S pinout, receiver line level and headphone gain
Full test scope, specifications & owner feedback ↓Full specifications, test scope, existing assessments & owner feedback
Loxjie D60 Product Profile
L2 Decision Profile · documentation + editorial assessment
Quick verdict
A digital/line/headphone hub subject to exact output-mode and gain verification
Avoid if: Guaranteed maximum headphone power or TV HDMI compatibility from an I2S connector
Evidence checked: 2026-10-17. Manufacturer documentation; no independent SoundPath Lab listening, measurement, compatibility or firmware retest.
System conditions
Verify mains label and output-mode/volume instructions on the supplied manual before use; match I2S pinout, receiver line level and headphone gain
Documented specifications
| Item | Specification and conditions |
|---|---|
| Inputs | USB, optical, coaxial, Bluetooth, I2S and AES/EBU in indexed official parameter section |
| Outputs | Single-ended/balanced line and6.35 mm/4.4 mm balanced headphone paths |
| Line conditions | 2.5 Vrms single-ended,5.2 Vrms balanced;100-ohm line output impedance |
| Power boundary | 32-ohm3000 mW×2 headline; frequency/distortion/port conditions not fully established by the excerpt |
Limits and source qualifications
Only the exact official parameter excerpt was accessible through search; complete operating manual, voltage/mode procedures and hardware were not reviewed/tested
Alternatives by need
AH90 documents network/USB and headphone level conditions; H26 is analogue-only. Choose the exact input/output roles
Keep or upgrade
Keep a working system that already meets these requirements. Consider a change only when the documented connection, control or system role solves a specific unmet need; no measured sound-quality upgrade is claimed.
Evidence, support and reassessment
Review scope
Exact-model primary specification and connection sections cited below were reviewed. Source claims and editorial system-fit reasoning are distinct from independent listening, measurement, compatibility or firmware tests; none were added.
Actual sound, under-load output, room/ear fit, latency and long-term reliability remain untested. Existing scores, Builder qualification and owner/test records were not reassessed.
Firmware and regional support
Local stock, authorized sales, transaction prices and long-term support duration are not established by this documentation review. Dated regional announcements apply only to their stated territory and terms. Existing dated price and owner evidence is retained.
No installed firmware version or issue resolution was retested. Follow the exact-model official support workflow.
Reassess when evidence changes
Reassess on verified hardware or firmware changes, clarification of a source conflict, material support/compatibility changes, or accepted independent testing.
No new six-month ownership evidence was added; existing owner and issue records remain unchanged.
Related records and tools
- Gustard DAMP-AH90
- Gustard AMP-H26
- Product directory
- System Builder
- Issues and limitations
- Firmware and app tracker
- Compare this product
Sources checked
- Indexed official parameters; publisher HTTPS paused (certificate error), complete manual not reviewed:
https://www.loxjie-audio.com/Upload/download/20240920140928258.pdf
Revision: 2026-10-17 — L0/L1 to L2 after model-level documentation and decision review. Product identity and existing scores/qualification retained. L2 is evidence coverage, not independent test acceptance.
Member knowledge · editor reviewed
Questions, owner experience and product issues
Join the live member discussion below, or submit structured experience and issue reports for editorial review.
Loading reviewed community records…